Every friend who uses an industrial tablet computer has encountered more or less crashes. The following are common crashes for your reference:
1. The industrial motherboard and the card are loose due to poor contact, or the slot on the industrial motherboard is broken, or the accessories such as the display card and memory are bad, causing the industrial display to be off.
2. Overclocking is over fire, sometimes the industrial display does not light up, and sometimes it crashes after entering the system. In severe cases, the CPU will be burned out.
3. The industrial voltage fluctuates too much, causing large or small currents on the industrial motherboard and card, and sometimes damaging the hardware. So it is very important to choose a power supply that can provide over-voltage protection, or add a voltage regulator.

4. The industrial tablet computer only hears a long single sound of "di, di" when it is turned on. It may be a problem with the memory. Try another slot. If it still does not work, the memory may be broken.
5. The virus causes the industrial tablet to freeze.
6, windows7, 8 systems need to use a part of the hard disk as virtual memory, the remaining space of the hard disk is too small, it will also cause the industrial tablet to crash.
7. If the industrial host is operating normally and there is sound from the hard disk, but the industrial display is not bright, it may be that the industrial display is broken, or the industrial display signal cable is not in good contact or broken, or the industrial display power is not plugged in.
8. Running software conflicts with each other. For example, 32-bit and 64-bit software running at the same time may cause crashes.
9. The chain file .Dll in the subdirectories such as System is lost, causing the Windows system to be paralyzed.
10. The machine runs too slowly, causing the illusion of crash.
11. Bugs in industrial tablet software cause crashes.
12. When the industrial tablet computer is connected to the Internet, a hacker intrudes, resulting in a crash.
13. The system registry information was modified incorrectly, causing the Windows system to fail to start.